Marine Growth Prevnting System - Supply Reference :3935 Ship Sets
M.G.P.S Anodes
Anodes FEATURES
CU Anode
produces ions which are transported by the seawater and carried into the pipework system to prevent marine growth.
AL Anode
produces ions which spread throughout the pipe work and produce an anti-corrosive layer on the internal surface of sea water cooling lines.
FE Anode
produces anti-corrosive films of Fe using specially alloyed anodes through the electrolytic conductor(seawater).
Thus the anti-corrosive layer adhesive on the internal surface of metal to prevent corrosion effectively.
Spare anodes
Spare anodes normally supplied by other vendors require of very hard extra work (about 4 hour per piece) for recycling the heavy corroded mounting sleeve and relative insulation material. However, our genuine anodes don't require of any extra work for recycling. New mounting sleeve and relative insulation material are completely assembled in a set in our workshop and then delivered for easy renew without any cost influence.
(Just 10 min. per piece!)
SPECIFICATION

TYPE

MATERIAL

INSTALLATION POSITION

CU ANODE

COPPER

Sea chest / Strainer / Anode treatment tank /
S.W. Pipes & etc.

AL ANODE

ALUMINIUM

FE ANODE

FERROUS